But unless you only charge at one location, you need to unplug the wire from the wireless charger and carry it with you, then plug in the wire to use the wireless charging. It will always be slow, and from what Ive read its designed to trickle charge all day, rather than plug it in every day or two. Thats fine if the mobile phone isnt very mobile, and assuming it can recharge more than a days use at night.
Its a meh for me. For some it will save a very small amount of time and inconvenience. I'd prefer a solar panel somehow built into the screen
From: "Kris Murray krismurray@gmail.com [iPad]" <iPad@yahoogroups.com>
To: iPad@yahoogroups.com
Sent: Monday, 22 February 2016 9:57 AM
Subject: Re: [iPad] iPhone 7: Apple plans 'to introduce charging from 15ft'
I beg to differ. Right now I must connect a wire to my iPhone to connect it to the power wart. In the future I won't need that wire to connect my iPhone to the power wart. That makes it wireless. *CURRENT* wireless charging is slow and even required a special pad be touching the phone. One would presume that Apple won't replace the charging or adopt this new tech unless it meets a bunch of parameters. One is that it's fast enough. But it's all speculation at this point.
~KLM
\\ "Antisocial behavior is a trait of intelligence in a world full of conformists" ~Nikola Tesla //
wireless charging is slow. Its a solution looking for a problem. And its not really wireless as you need to have the charger plugged in, and if you dont want to carry it around your back to a USB cable at other locations that you charge from
From: "Kris Murray krismurray@gmail.com [iPad]" <iPad@yahoogroups.com>
To: iPad@yahoogroups.com
Sent: Monday, 22 February 2016 8:40 AM
Subject: Re: [iPad] iPhone 7: Apple plans 'to introduce charging from 15ft'
Roughly the same amount of time as when it's plugged in via IUSB, that would be the original goal. I won't be getting that one. I'll be getting the 8.5 or 9. That's my goal lol~KLM\\ "Antisocial behavior is a trait of intelligence in a world full of conformists" ~Nikola Tesla //how long will charging from 15 feet take?
From: "Kris Murray krismurray@gmail.com [iPad]" <iPad@yahoogroups.com>
To: iPad@yahoogroups.com
Sent: Monday, 22 February 2016 4:58 AM
Subject: Re: [iPad] iPhone 7: Apple plans 'to introduce charging from 15ft'
It'll be the first truly wireless iPhone.~KLM\\ "Antisocial behavior is a trait of intelligence in a world full of conformists" ~Nikola Tesla //
On Feb 20, 2016, at 6:59 PM, David Smith david..smith...14916@gmail.com [iPad] <iPad@yahoogroups.com> wrote:Meh.
iPhone 7: Apple plans 'to introduce charging from 15ft'
Partnership with wireless charging firm could see revolutionary tech on handsets in the near future
It was rumoured last month that Apple was interested in adding groundbreaking wireless charging capabilities to its iPhone range, using technology that would enable the handset to be re-charged autonomously from a substantial distance.
Now, fresh reports hint the company could introduce it on their upcoming iPhone 7.
According to the New York Post, Apple has partnered up with tech firm Energous to use their WattUp wire-free charging system in future smartphones.
Energous's two-part technology allows "practically any type of device" to be charged wirelessly from distances of up to 15ft..
It uses a "tiny" chip - ideal for Apple, considering their design constraints – which receives power from a transmitter. It could mean phones able to be recharged while in user's pocket, so long as they were in range of the charging beacon.
Apparently, there's a "good amount of evidence out there" suggesting Energous has landed a major partner who is interested in bringing their technology to the market - and that partner could be Apple.
If the rumours are true, it could herald "the biggest technological advancement in smartphones since Apple released the original iPhone in 2007" as users will no longer have to be pro-active in remembering to charge their phones.
So far, the company has toyed with wireless charging capabilities on products such as the Apple Watch rather than their iPhones. They have made it known the technology is something they would only pursue if it became truly revolutionary, rather than the mat-based setups most rival smartphone makers have adopted.
It's also typical of Apple to be late to market with a particular technology only to apply it in a way rivals have yet to fully exploit..
Introducing a feature as radical as this could be key for turning around predictions that the iPhone is about to go into decline. Many users adopted the iPhone 6 when it was released but since then, sales have begun to stagnate. There are worries the smartphone could recede for the first time soon, in part due to current owners not finding the new features so appealing that they want to upgrade. A wireless charging system, which would mean the phone could be recharged passively while in the pocket, for example, would grab their attention.
Regardless of how advanced the wireless charging technology will be when Apple finally introduces it, it's a feature which could become a necessity – and not just from a consumer's point of view. One of the longest-running and heaviest rumours regarding the iPhone 7 is that it will ship without a headphone jack in a bid to make it slimmer. If this is the case, the Lightning port will be used to dock headphones. Without a wireless charging system in place, using wired headphones and charging the phone at the same time would be impossible unless Apple were to place two ports on the handset.
According to the International Business Times, Energous aims to launch its technology at some point in 2016 or 2017. If the rumours are true, it could seem that either the iPhone 7, set to be released in September, or next year's iPhone 7S could arrive with a real game-changing addition.
iPhone 7: Interference shielding will boost handset's performance
17 January
Apple's iPhone 7 could arrive with an upgrade to its internal hardware in a bid to find new ways to increase its performance, according to several sources on the internet.
The latest rumour suggests the tech giant is interested in using electromagnetic interference (EMI) shielding to unlock more performance and decrease the potential for electromagnetic waves to interfere with processing chips.
At the moment, the technology is used on iPhone 6S's printing circuit board and connector, but it looks set to be introduced on most major chips within Apple's next flagship handset, which is due to be introduced later this year.
According to BGR, the benefits are two-fold.
Firstly, by reducing the potential for the chips to be interfered with, the next iPhone should offer users an even better wi-fi and cellular data experience as electromagnetic interference is reduced and performance increased.
They also point out that EMI-covered chips will let Apple "create more elaborate mainboard designs", packaging internals closer together and freeing up space for a larger battery – something iPhone fans have wanted for some time. The iPhone 7 is said to be thinner than previous models so finding ways to package the battery could be a priority.
Secondly, the amount of electromagnetic waves emitted would be reduced substantially, addressing health concerns people may still have regarding mobile phones.
"As clock signals of digital chips have increased and as diverse functions such as 3D Touch and others were recently added, reduction of electromagnetic waves has emerged as a major topic of this industry," an industry insider told ETNews.
MacRumors reports Apple has already found South Korean partners responsible for the production of the EMI shielding technology on the iPhone 7, suggesting the rumours hold water.
New: try our free iPhone app, The WeekDay, for all the news that matters and nothing more. Click here for twice-daily digests distilled from the best of the British and international media
iPhone 7: how will you connect your headphones if Apple kills off standard jack?
16 February
New reports have shone further details on what Apple could be planning to do with the headphone jack on the iPhone 7.
One of the longest running rumours surrounding the upcoming phone is that it will ship without the industry standard 3.5mm jack and the Lightning port will be used to connect headphones.
Now, a research memo by Barclays and obtained by AppleInsider suggests just what the tech giant could be planning.
The iPhone 7 may come with a second speaker where the port would otherwise be, giving the phone stereo audio output.
"The headphone jack on the iPhone 6s is located along the same edge as its single speaker, which might make it a natural location," adds the website.
Several smartphones, including Google Nexus, Sony and HTC, use a stereo speaker setup. However, introducing it on the iPhone could give Apple an advantage over Samsung and its upcoming Galaxy S7 as historically, its devices have only had one speaker..
MacRumors adds that the same reports shines light on what removing the headphone jack will mean for the peripherals that typically come with the iPhone and that a "lightning equipped headphone accessory" is expected to ship in the box, with the potential for noise-cancelling technology to be added in 2017.
Apple will use a "simple codec" to introduce Lightning port audio on the iPhone 7, followed by a more advanced noise cancelling codec next year, it says.
The thought that Apple could do away with the jack isn't far-fetched – the tech giant has made no secret of the fact the jack obstructs it from making thinner devices and they have shipped other products without ports some consider to be essential.
In 1998, Apple launched the iMac with no floppy drive while in recent years, the MacBook has lost both the CD drive as well as standard USB ports.
Whether their gamble will pay off will depend largely on how much third party electronics manufacturers are keen to play ball with the tech giant's move away from the industry standard. Indeed, back at the Consumer Electronics Show in January, many didn't seem perturbed by the rumours at all.
The Verge reported that most headphone makers weren't overly concerned - many of them will likely be keen to sell more Bluetooth sets or have Lightning connector headphones either already on sale or in the pipeline..
Should Apple's jack-free handset appear, the company will almost certainly provide evidence that they've considered the concerns of potential iPhone adopters. They could even use it as an opportunity to develop "smart headphones" with new features before introducing noise-cancelling in 2017, as rumoured.
iPhone 7: Apple lands blow on Samsung ahead of Galaxy S7
12 February
Samsung is to launch its new iPhone 7-rivalling handset the Galaxy S7 later this month - but Apple has dealt its key competition an early blow, from a business point of view.
It appears the A10 processor chip set to be used in Apple's upcoming iPhone 7 will be manufactured exclusively by Taiwan Semiconductor Manufacturing Company (TSMC) when the first internals for the handset go into production this summer.
Previously, manufacturing of the A9 chip used on the 6S models had been shared between the Taiwanese company and South Korea's Samsung. But early benchmark tests hinted the TSMC chip outperformed its Samsung made rival by 3 per cent, something Apple later confirmed in head-to-head tests.
According to MacRumors, Apple has now chosen to delegate full responsibility to the Taiwan firm due to its 10-nanometre manufacturing process, as well as its more advanced device packaging techniques, which "allow for better performance and efficiency".
Tech site BGR adds that "it's no secret that Apple has been itching to more fully phase Samsung out of the iPhone for quite some time now" and that the South Korean company, "which has long been an Apple manufacturing partner, is being completely shut out".
If the rumours are true, says Android Authority, it could leave Samsung's semiconductor division in a "state of emergency". The company will lose out on the "holy grail of chip contracts" if TSMC get exclusive purview to make the A10, but could make up for it by courting US telecom company Qualcomm to make the Snapdragon 820 chip that will make its way onto many rival handsets.
They also point out it's not the first time Apple has sent Samsung reeling. In 2014, the company was left out in the cold over production of the A8 chip used on the iPhone 6. Samsung won back favour for the iPhone 6S - which begs the question as to whether it can get back a share of manufacturing duties when the iPhone 7S comes out in 2017.
iPhone 7: concept points to wireless charging
11 February
Concept sketches for upcoming iPhones tend to come in two distinct flavours: those that try to imagine what the next generation will actually be and those that simply investigate what it could potentially be.
Designer Herman Haidin's drawings definitely fall into the latter category.
In a series of sketches published on Behance.net, the Ukrainian imagines an iPhone constructed from "liquidmetal" – for which Apple acquired the patent in 2010 and could potentially make the handset completely waterproof and pave the way for wireless charging.
So what is liquidmetal? Many of us already own a piece of it - every iPhone box sold today comes with a small piece of the material in it: the small prong SIM ejector.
Liquidmetal is an alloy with "an amorphous atomic structure and a multi-component chemical composition", tech site BGR says. "The special metal has high tensile strength, corrosion resistance, water resistance and better elasticity.."
In his concept sketch, Haidin imagines the iPhone 7 with a layer of liquidmetal incorporated just beneath the screen to act as the cooling system for the new handset and help its internal components stay dry.
His drawing proposes that the handset will also have a five-inch display but be only three millimetres thick, half that of the iPhone 6S. A little fanciful, but it is within the realms of possibility according to some leaks, which suggest Apple is pushing to make its next devices slimmer than ever.
The concept also adds wireless charging to the new phone and full-screen gaming, both of which would certainly be eye-catching features.
Previous rumours suggested Apple is interested in making the upcoming versions of its flagship handset waterproof and the liquidmetal design studies are not the only whispers so far suggesting an exotic material could be used to construct the chassis of the phone.
The design of the soon-to-be outgoing 6S – particularly the rear of the handset – has divided critics due to its protruding camera module and exposed antenna bands breaking up what would otherwise be a completely flush surface.
Previously, it was hinted that a new anodised metal could be used to make the phone in the future, meaning the antenna bands would no longer be exposed on the exterior casing. Now, though, a new report by Business Korea says Apple could be looking at incorporating ceramic materials into the design of the iPhone as part of its drive to remove the bands.
Alphr says the material would be used on the back of the device – the area in need of a tidy up. It notes that rival handsets, such as the OnePlus X, use ceramic materials to give the phone a "premium feel" and that using ceramics would be a good place to start if Apple wished to make its iPhone 7 more stylish than the 6 models. However, it says the likelihood of ceramic iPhones is "a mixed bag", regardless of strong rumours indicating the handset will look different.
"While the source for the rumour seems to be nothing more than a prediction, it does raise an interesting possibility. Handsets such as the OnePlus X have shown that ceramic materials offer a higher level of premium feel – the sort of feel you'd associate with Apple products... If Apple wants to do something new and make the iPhone 7 even more stylish than its predecessor, giving it a ceramic finish would be a good place to start."
More likely, says Alphr, are the rumours that the iPhone 7 will feature a waterproof design and ditch protruding cameras and the device's rear antenna lines.
The idea that the iPhone might be waterproof gathered momentum after Apple filed patents for ports that can eject water.
Titled "Electronic Device With Hidden Connector", the patent "shows a connector covered by a self-healing elastomer," Alphr says. "Diagrams included in the patent show the elastomer allowing the penetration of a probe, and self-sealing once the probe is removed. The port is shielded from the elements at all times, but still allows quick and easy access for charging, headphones or anything else."
iPhone 7: patents hint at touchless, button-free handset
5 February
iPhone users could someday be able to navigate and interact with their handsets without touching them.
Newly discovered patents filed by Apple show the company is interested in expanding its 3D touch features from the iPhone 6S to expand what can be done with its force-sensitive feature on future handsets.
The first patent describes a radical idea called "proximity and multi-touch sensor detection and demodulation" – essentially, technology to allow users to navigate their handsets without even touching them.
According to ValueWalk, the system would use photodiodes or other proximity-sensing hardware connected to the iPhone's current force-sensitive 3D touch capabilities. This would allow users to control the handset merely by hovering their fingers over the display and pushing virtual buttons created by bouncing infrared emitted from LEDs back into the photodiodes. Apparently, it could improve the device's battery life as well as saving space.
It's an interesting feature, but ValueWalk says it most likely will not be coming on the iPhone 7 in September. Apple has yet to roll out comparatively simple 3D touch on many of its devices and according to AppleInsider, releasing hover-touch now could "muddy the waters". The patent was only filed in March 2015, too.
The second user interaction-based patent outlines plans to introduce 3D touch to the home button. AppleInsider says this would work by arranging electrodes underneath the home button that would connect when pressed and introduce new options depending on the amount of pressure exerted.
"For example, an iPhone can be unlocked by a light touch with a registered finger, while a deep press unlocks the device and executes an operation like opening an app," it says. "Contextual commands might also be mapped to distinct pressure levels, such as replying to a recently received message with a selection of intelligent responses".
While most of the focus is on the functions such an addition could bring to the iPhone, TechnoBuffalo says it could have a massive impact on the handset's design as well. Introducing a home button with force-sensitive touch could mean it no longer needs to be a physical feature and instead could be a flat surface with haptic feedback – curious, considering early iPhone 7 rumours hinted it may have an edge-to-edge display. Using 3D touch like this could mean the home button becomes a location on the screen rather than a physical element.
iPhone 7 leak suggests 'thinnest, smoothest handset ever'
04 February
New details regarding the Apple iPhone 7 have reportedly been leaked.
According to Macrumours, a source close to Apple with a reliable track record of leaking accurate information has given the clearest indication yet of what to expect when the iPhone 7 is revealed in September.
According to the source, the chassis of the phone will be extremely similar to that of the iPhone 6, with two noticeable revisions.
The first change will be an alteration to the camera which will result in a slightly different look around the aperture. Apple is said to be interested in using a thinner and smaller camera module on the iPhone 7, and doing so would remove the bump the aperture currently creates on the body of the iPhone 6 and 6S, meaning the back of the phone would be smooth and flush.
Forbes says there are three more advantages to introducing the new, flush design. At the moment, when the iPhone is placed on a table, the protruding module becomes irritating as the bump makes the handset wobble. The change also means that such a delicate part will no longer be a continual point of impact when putting the phone down and that third-party case designs will be much simpler.
The other revision is said to be a change to how the antenna bands work on the handset. At the moment, the bands on the iPhone 6 models create white borders on the rear of the phone, meaning the top and bottom of the handset are divided awkwardly. Critics have called the current design unsightly – a criticism Apple may have taken to heart..
According to the source, the antenna bands will still remain exposed on the exterior of the phone, but the bar dividing the rear of the handset visually into three sections will be removed, making for a smooth, all-metal finish.
There have been whispers in the past that Apple is not satisfied with the design of the iPhone 6. Last year it was reported that the company had filed a patent for a new anodized metal design for future handsets which would allow wireless signals to be received strongly with a full metal case. iPhonehacks touted it as a possible addition to the iPhone 7..
The source did not add any information regarding the dimensions of the handset, but it is expected that the iPhone 7 will be slimmer than the iPhone 6 and 6S. Strong rumours have suggested that Apple will controversially remove the headphone jack from the device in order to reduce the thickness of the phone substantially.
Regarding the rumour that Apple will could introduce a 'dual-camera' equipped iPhone 7 Plus in September, Macrumours also has new information.
According to sources within the supply chain, Taiwanese, Japanese and Chinese camera manufacturers have sent Apple examples of potential iPhone dual camera setups for testing ahead of potential inclusion in the iPhone range.
It is not clear at this time how a change to the internals of the camera to make it flush with the bodywork will factor in to the dual-camera rumours.
In December, an episode of the US TV show 60 Minutes said the tech giant has more than 800 engineers working on the cameras and detailed the intricate process behind creating a smartphone camera for an Apple device. Around the same time, early rumours of the next iPhone coming with a dual-camera set-up were beginning to do the rounds on the internet. Since then, the reports have modified to accommodate the rumoured third iPhone 7.
New: try our free iPhone app, The WeekDay, for all the news that matters and nothing more. Click here for twice-daily digests distilled from the best of the British and international media
~KLM
\ "Antisocial behavior is a trait of intelligence in a world full of conformists" ~Nikola Tesla //
__._,_.___
Posted by: Tony <tdale@xtra.co.nz>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (8) |
.
__,_._,___